|     

Room Control Systems



Our Visualizer and Cynap systems are capable of communicating with Room Control Systems or 3rd party applications over their built-in network interfaces. Downloadable Room Control System templates for Cynap and Visualizer systems are for demonstration purposes only. Please adapt them to your individual setup before use on any integration setup.

Some of our Visualizers are also capable of communicating over USB and/or RS232.

Additional information about the protocols for WolfVision Cynap and Visualizer systems can be found on the APIs tab in the downloads section.



Cynap (for Visualizers see below)

Requirements:
Model 3 controller (MC3 and up) and a touch panel. Latest Cynap firmware

Operating more than one Cynap from a single controller has been enabled but not tested and therefore is not advised.
Current versions for Cynap, Cynap Core, Cynap Pure Pro, and Cynap Pure Download  
RMS module Version 1.05.00 for Cynap Pure
(For Crestron database versions 200 & above/Optimized for Cynap Pure firmware version v1.47e)
Release date: 26 April 2021
download
RMS module Version 3.06.00 for Cynap/Cynap Core/Cynap Pure Pro
(For Crestron database versions 200 & above/Optimized for Cynap firmware version V1.46f)
Release date: 22 March 2021
download


Older versions for Cynap, Cynap Core, Cynap Pure, Cynap Pure Pro Download  
RMS module Version 1.04.00 for Cynap Pure
(For Crestron database versions 200 & above/Optimized for Cynap Pure firmware version v1.46f)
Release date: 14 December 2020
download
RMS module Version 1.03.00 for Cynap Pure
(For Crestron database versions 200 & above/Optimized for Cynap Pure firmware version v1.42e)
Release date: 3 November 2020
download download
RMS module Version 1.03.00 for Cynap Pure
(For Crestron database versions below 200/Optimized for Cynap Pure firmware version v1.42e)
Release date: 3 November 2020
Crestron database versions below 200 versions will no longer receive regular updates prior to version 1.03.00
download download
RMS module Version 3.05.00 for Cynap/Cynap Core/Cynap Pure Pro
(For Crestron database versions 200 & above/Optimized for Cynap firmware version V1.44f)
Release date: 14 December 2020
download download
RMS module Version 3.04.01 for Cynap/Cynap Core/Cynap Pure Pro
(For Crestron database versions 200 & above/Optimized for Cynap firmware version V1.42e)
Release date: 5 November 2020
download download
RMS module Version 3.04.01 for Cynap/Cynap Core/Cynap Pure Pro
(For Crestron database versions below 200/Optimized for Cynap firmware version V1.42e)
Release date: 5 November 2020
Crestron database versions below 200 versions will no longer receive regular updates prior to version 3.04.01
download download
RMS module Version 1.02.00 for Cynap Pure
(For Crestron database versions 200 & above/Optimized for Cynap Pure firmware version v1.40h)
download
RMS module Version 1.02.00 for Cynap Pure
(For Crestron database versions below 200/Optimized for Cynap Pure firmware version v1.40h)
download
RMS module Version 3.04.00 for Cynap/Cynap Core/Cynap Pure Pro
(For Crestron database versions 200 & above/Optimized for Cynap firmware version V1.42e)

download
RMS module Version 3.04.00 for Cynap/Cynap Core/Cynap Pure Pro
(For Crestron database versions below 200/Optimized for Cynap firmware version V1.42e)

download
Looking for specific version? Please send an email to [email protected] to request an archived version.


Visualizer


Visualizer drivers Stand-alone Visualizer drivers for installations without a Cynap system are available for download from the Crestron Download Page. This module supports the following systems:
Type Model  
Portable Visualizers vSolution Cam, VZ-3, VZ-3s, VZ-3neo, VZ-8neo, VZ-8neo+, VZ-8light4, VZ-8plus4, VZ-9Plus Serial #1008068 and Up, VZ-9plus3, VZ-9.4L, VZ-9.4F, VZ-P18, VZ-P38,  
Ceiling Visualizers VZ-C12-II Serial #1009412 and Up, VZ-C123, VZ-C32 Serial #1011797 and Up, VZ-C323, VZ-C6, VZ-C3D
Cameras Eye-12, EYE-14
Crestron Download Page
Crestron supports the following devices with a driver over the RS232 protocol. Drivers are available for download from the Crestron Download Page.
Type Model
Portable Visualizers VZ-8, VZ-8light, VZ-8plus, VZ-8light2, VZ-8plus2, VZ-8light3, VZ-8plus3, VZ-9, VZ-9plus and VZ-9plus3
Professional Visualizers VZ-27, VZ-57, VZ-27plus, VZ-27plus², VZ-57plus, VZ-P18 and VZ-P38
Ceiling Visualizers VZ-C10, VZ-C11, VZ-C12, VZ-C122, VZ-C123, VZ-C30, VZ-C32 and VZ-C323
Cameras PSM-10, EYE-10, EYE-12, SCB-1 and SCB-12
The following devices are also supported with a driver which provides control capabilities over the RS232 and Ethernet/LAN interfaces:
Type Model
Portable Visualizers VZ-9plus from serial number 1008068 and above, VZ-9plus3
Professional Visualizers VZ-P18 and VZ-P38
Ceiling Visualizers VZ-C122 from serial number 1009412 and above, VZ-C123, VZ-C32 from serial number 1011797 and above, VZ-C323
Cameras EYE-12/SCB-12 from firmware version 1.10a and above
 
Drivers for WolfVision Visualizers can be downloaded from the Extron Download Page. For Cynap Pure, a module is available below that enables control via Extron systems.
The module for Cynap Pure can be downloaded directly from this page. Download  
Current version
RMS module Version 1.03.00 for Cynap Pure
(Optimized for Cynap Pure firmware version v1.47e)
download
Previous version
RMS module Version 1.01.00 for Cynap Pure
(Optimized for Cynap Pure firmware version v1.34g)
download
Portable Visualizers vSolution Cam, VZ-3neo, VZ-8neo, VZ-8neo+, VZ-8, VZ-8light, VZ-8plus, VZ-8light2, VZ-8plus2, VZ-8light3, VZ-8plus3, VZ-8light4, VZ-8plus4, VZ-9, VZ-9plus and VZ-9plus3, VZ-9.4L, VZ-9.4F
Professional Visualizers VZ-27plus, VZ-27plus2, VZ-57plus, VZ-P18 and VZ-P38
Ceiling Visualizers VZ-C10, VZ-C11, VZ-C12, VZ-C122, VZ-C123, VZ-C30, VZ-C32 and VZ-C323
High resolution live image camera PSM-10 and EYE-10
Cameras EYE-12 and SCB-12
The following devices are also supported with a driver which provides control capabilities over the RS232 and Ethernet/LAN interfaces:
Type Model
Portable Visualizers VZ-9plus from serial number 1008068 and above, VZ-9plus3
Professional Visualizers VZ-P18 and VZ-P38
Ceiling Visualizers VZ-C122 from serial number 1009412 and above, VZ-C123, VZ-C32 from serial number 1011797 and above, VZ-C323
Cameras EYE-12/SCB-12 from firmware version 1.10a and above


Current versions for Cynap, Cynap Core, Cynap Pure Pro, & Cynap Pure Download
RMS module for Cynap / Cynap Core / Cynap Pure Pro
Version 3.06.00 - Release date: 22 March 2021
Optimized for Cynap/Cynap Core/Cynap Pure Pro firmware version v1.46f

download
RMS module for Cynap Pure
Version 1.03.00 - Release date: 26 April 2021
Optimized for Cynap Pure firmware version v1.47e

download
Older versions for Cynap, Core, Pure and Pure Pro.
RMS module for Cynap Pure
Version 1.02 - Release date: 14 December 2020
Optimized for Cynap Pure firmware version v1.46f

download
RMS module for Cynap / Cynap Core / Cynap Pure Pro
Version 3.05.00 - Release date: 14 December 2020
Optimized for Cynap/Cynap Core/Cynap Pure Pro firmware version v1.44f

download
RMS module for Cynap / Cynap Core / Cynap Pure Pro
Version 3.04.01 - Release date: 5 November 2020
Optimized for Cynap/Cynap Core/Cynap Pure Pro firmware version v1.42e

download
RMS module for Cynap Pure
Version 1.01 - Release date: 9 September 2019
Optimized for Cynap Pure firmware version v1.32j

download
RMS module for Cynap / Cynap Core / Cynap Pure Pro
Version 3.04.00
Optimized for Cynap/Cynap Core/Cynap Pure Pro firmware version v1.42e

download
RMS module for Cynap / Cynap Core / Cynap Pure Pro
Version 3.03.00
Optimized for Cynap/Cynap Core/Cynap Pure Pro firmware version v1.40g

download
RMS module for Cynap / Cynap Core / Cynap Pure Pro
Version 3.02.02
Optimized for Cynap/Cynap Core/Cynap Pure Pro firmware version v1.36i

download
RMS module for Cynap / Cynap Core
Version 3.02
Optimized for Cynap/Cynap Core/Cynap Pure Pro firmware version v1.36i

download
RMS module for Cynap/Cynap Core
Version 3.01
Optimized for Cynap firmware version V1.32j

download
RMS module for Cynap Pure
Version 1.0
Optimized for Cynap Pure firmware version v1.29k and v1.30j

download
RMS module for Cynap/Cynap Core
Version 2.07
Optimized for Cynap firmware version V1.30j

download
RMS module for Cynap/Cynap Core
Version 2.05.4
Optimized for Cynap firmware version V1.22c to 1.28i

download
RMS module for Cynap/Cynap Core
Version 2.05
Optimized for Cynap firmware version V1.18 and 1.20

download
RMS module for Cynap
Version 2.04
Optimized for Cynap firmware version V1.16g

download
RMS module for Cynap
Version 2.03
Optimized for Cynap firmware version V1.14f

download
RMS module for Cynap
Version 2.02
Optimized for Cynap firmware version V1.12e

download
RMS module for Cynap
Version 2.00
Optimized for Cynap firmware version V1.10i

download
RMS module for Cynap
Version 1.14
Optimized for Cynap firmware version V1.06f

download
Visualizer Drivers Stand-alone Visualizer drivers for installations without a Cynap system are available for download from the AMX Download Page. Please note that you have to create a user account on the AMX homepage to get access to the driver download area. Creating such an account is free of charge. AMX supports the following devices with a Duet (written by WolfVision) over the Ethernet/LAN interface:
Type Model  
Desktop Visualizers VZ-3, VZ-3s, VZ-3neo,VZ-8neo, VZ-8light4, VZ-8plus4, VZ-9.4F, VZ-9.4L,
Ceiling Visualizers VZ-C6, VZ-C3D
Cameras EYE-14
 AMX supports the following devices with a Duet (written by WolfVision) or NetLinx module (written by AMX) over the RS232 protocol:
Type Model
Portable Visualizers VZ-8, VZ-8light, VZ-8plus, VZ-8light2, VZ-8plus2, VZ-8light3, VZ-8plus3,
VZ-9, VZ-9plus and VZ-9plus3
Professional Visualizers VZ-15, VZ-35, VZ-45b, VZ-27, VZ-57, VZ-27plus,
VZ-27plus2, VZ-57plus, VZ-P18 and VZ-P38
Ceiling Visualizers VZ-C10, VZ-C11, VZ-C12, VZ-C122, VZ-C123, VZ-C30, VZ-C32 and VZ-C323
Cameras EYE-12 and SCB-12
The following devices are also supported with a driver which provides control capabilities over the RS232 and Ethernet/LAN interfaces:
Type Model
Portable Visualizers VZ-9plus from serial number 1008068 and above, VZ-9plus3
Professional Visualizers VZ-P18 and VZ-P38
Ceiling Visualizers VZ-C122 from serial number 1009412 and above, VZ-C123, VZ-C32 from serial number 1011797 and above, VZ-C323
Cameras EYE-12/SCB-12 from firmware version 1.10a and above

You can download these drivers from the Cue Download Page Be aware that you have to create a user account on the Cue homepage to get access to the driver download area. For creating a user account you have to enter the country you are from and your distributor (distributor has to verify you as customer). Creating a user account is free of charge.

Cue supports the following devices with a driver (written by Cue) over the RS232 protocol:
Type Model
Portable Visualizers VZ-8, VZ-8light, VZ-8plus, VZ-8light2, VZ-8plus2, VZ-8light3, VZ-8plus3, VZ-9, VZ-9plus and VZ-9plus3
Professional Visualizers VZ-27, VZ-57, VZ-27plus, VZ-27plus2, VZ-57plus, VZ-P18 and VZ-P38
Ceiling Visualizers VZ-C10, VZ-C11, VZ-C12, VZ-C122, VZ-C123, VZ-C30, VZ-C32 and VZ-C323
Cameras EYE-12 and SCB-12
The following devices are also supported with a driver which provides control capabilities over the RS232 and Ethernet/LAN interfaces:
Type Model
Portable Visualizers VZ-9plus from serial number 1008068 and above, VZ-9plus3
Professional Visualizers VZ-P18 and VZ-P38
Ceiling Visualizers VZ-C122 from serial number 1009412 and above, VZ-C123, VZ-C32 from serial number 1011797 and above, VZ-C323
Cameras EYE-12/SCB-12 from firmware version 1.10a and above

NEETS supports the following WolfVision Visualizer Systems with its own device drivers. This makes it very convenient when configuring NEETS control panels to work in combination with our devices.

Further information: www.neets.dk
Type Model
Desktop Visualizers VZ-3, VZ-3S, VZ-8light4, VZ-8plus4, VZ-9plus (serial no. 1008068 and above), VZ-9plus3, VZ-9.4L, VZ-9.4F, VZ-P18, VZ-P38
Ceiling Visualizers VZ-C6, VZ-C122 (serial no. 1009412 and above), VZ-C32 (serial no. 1011797 and above), VZ-C123, VZ-C323VZ-C3D
Live Image Cameras EYE-12, EYE-14, SCB-12